Evaporative Cooling Systems Buying Guide

Evaporative cooling systems are also known as swamp coolers. They are suitable for places where there is low humidity and the air is hot. These help in combining the cooling properties of water with a steady breeze for lowering the indoor temperatures.

Best Air Coolers In India

There are a number of factors which need to be considered before choosing these systems. These factors are described below:

1. Type of coolers

Before buying an evaporative cooling system, it is essential to know what kind fulfills all requirements. Following described the types of coolers.

    • Direct: This model helps in cooling down the surrounding air. This cool air is then released into the medium. Thus, it helps in increasing the humidity and removing stagnant air from the surroundings.

 

    • Indirect: These are slightly different from the direct ones. They utilize an evaporative media, which is suitable inside a cooling tower. This helps in cooling down the water to an appropriate temperature.

 

    • Up Draft: These systems are generally installed on the house’s floor. This helps in blowing the cool air in a direction upwards into the house.

 

    • Down Draft units: The installation of a down-draft system is done on the roof of a house. This helps in blowing the cool air in the downward direction. These are very popular among homeowners. It is important to keep in mind that their maintenance is time-consuming and expensive.

 

    • Side draft units: The installation of these units is done on the side of the house, generally in a window. The blowing of cool air into the house is similar to that of a window air conditioning system.

 

  • Portable: These coolers are designed for small living areas. They can be used in individual rooms too.

It is important to remember that each type of evaporative coolers have their own sets of pros and cons, and needs different installation and maintenance procedures. Those that make less noise and give better cooling effect must be purchased. So if you are Looking for Best Air Cooler in India this summer day then why not look at some of the portable air coolers available online, with a wide choice of coolers available you are sure to find one that will match your needs for keeping you cool.

2. Types of Pads

After choosing the type of these systems, one needs to select the type of pad to be used in them to increase their performance. There are basically two types of pads. The first type of pad is fibre pad and the second type is rigid media pad. Although fibre pads are not expensive, their replacement frequency is high and also requires more maintenance. On the other hand, although the rigid media pads are expensive, less maintenance is needed. If they are maintained properly, then they can last for many years.

    • Fibre Pads: The materials used for making fibre pads are synthetic fibre, aspen wood shavings, and cellulose fibre. Fibre pads are used in those units which have inlets on multiple sides. These pads are highly economical. They are generally one to two inches thick. Pads made of aspen wood are the most durable ones. They come in exact sizes. On the other hand, those made of synthetic or cellulose fibres are cut to fit.

 

  • Rigid media pads: These pads are made of stacked corrugated material. These kinds of pads are used for those units that have single inlets. They need more upfront investment. They are generally eight to twelve inches thick. They require lower maintenance. They help in allowing air to pass at low speed. This results in an increase of humidity in the air, thereby reducing its temperature. If regularly maintained is done, their life cycle is extended to a very long time.

3. Selecting a suitable brand

Once the type of evaporative cooling system and the pads to be used in them is decided, the last step is to decide the brand to be selected. Although there are a number of popular brands, one that fulfills all requirements must be selected.

 

Induction Cooktop Full Review

What is an Induction Cooktop?

An induction cooktop is altogether different from the customary electric cooker, and gas stove, so far as that is concerned. Rather than utilizing direct warmth or open flares, similar to gas stoves, it utilizes induction, a procedure of exchanging heat starting with one vessel then onto the next, keeping in mind the end goal to cook nourishment equitably. Induction innovation offers numerous more preferences if contrasted with customary cooking apparatuses. For a certain something, induction utilizes less vitality. In case you’re contemplating purchasing an induction cooktop for your kitchen, here are five things that you ought to consider and buy the best induction cooktop  for your home

portable-micro-induction-cooktop-sr-964tb-sunpentown-burner

5 things to consider when purchasing an Induction Cooktop

1. Energy effectiveness. In the present intense economy, a tight spending plan is an ever-introduce prevention to everything. Fortunately, you can spare a considerable measure of cash in the event that you purchase induction cooktops. In principle, induction utilizes less vitality looked at gas stoves and other electrical cooking machines. By and by, induction cooktops can net you a considerable measure of reserve funds by being fuel-proficient. Since induction enables nourishment to cook all the more rapidly and securely, you additionally spare valuable time and at the same time stay away from sustenance wastage.

2. Something else to consider when purchasing induction-based cooktops is compactness. A large portion of the cooktops sold today is not as compact as they are publicized. Remember that there are a few things that may influence versatility, for example, the measurements and weight. What’s more, regardless of the possibility that the cooktop is sufficiently little and sufficiently light, its transportability might be diminished on the off chance that it doesn’t have a long line.

Read more details about induction cooktop here

3. Cooking time. Not everyone of us has that much time to spend on cooking, particularly in cooking fragile cousins and formulas. In purchasing induction-based cooktops, the speed of cooking is something else that must be considered. The cooktops cooking space will change as indicated by the way warm is appropriated to the cookware, the measure of warmth that is conveyed and the power used to create the warmth. These things can be found in the specs, so ensure that you read those.

InductionCooktop

4. Convenience. Much as you don’t have all the time on the planet to spend on cooking, you likewise can’t extra a lot of mental vitality in making sense of how to function things out. To be handy, pick an induction cooktop that has a flawless design and a simple to utilize control board. Along these lines, you won’t need to dawdle and exertion attempting to disentangle how to initiate something so basic as a clock.

5. The exact opposite thing to consider is an outline. Contemporary kitchens, particularly top of the line kitchens, can’t have second-rate looking cooktops. Regardless of the possibility that the cooktop has cutting edge innovation inside, its outside appearance is obviously essential. As a suggestion, pick the best induction cooktop that works great and looks great.

How Easy Is It To Build Your Own Solar Panels?

solar-panels

Basically, it usually is as simple as 123 with the help of step by step instructions. It is possible to build your very first thoroughly functional solar panel within one day and a quarter.  Needless to say, there’s a chance you’re swifter compared to us!

What will you need to Make Solar Panels at Home?

Solar CellsSolar cells is what you need to convert solar power to electricity. Sound costly? Well, not quite. For this DIY project, you can obtain solar cells for a pretty low investment. Think eBay, you can get solar cells at a bargain from them.

PlywoodPlywood or any wooden surface to put the solar cells into.

PlexiglassPlexiglass or glass to protect solar cells from bad weather conditions. If you have to make a choice between plexiglass and glass, go for plexiglass as it tougher than glass and will not crack easily.

Tin Tabbing Wire – It will be used to connect solar cells together.

Solder – If you don’t already have one you can buy it cheaply from your local hardware store.

Easy Steps to Build Solar Panels at Home

Building the solar panel box

1 Cut a sheet of plywood to match the length and width required for solar cell arrays. An array of 36 mono-crystalline solar cells of size 3 X 6 inches will require a plywood sheet that is 0.37 inches (9.5 millimeters) thick, 45 inches long and 24.25 inches wide (this measurement takes into account the space between the solar cells). It is to be noted here that same size solar cells are to be used in a panel.

2 Get four ¾ inch X ¾ inch wooden strips and by using a wood adhesive and screws affix these along the outer edges of the plywood sheet made in step 1. It will make the box shallow for containing solar cells in it.

3 In the bottom rail of the ¾ inch X ¾ inch wooden strip that you affixed in the step 2 drill holes (approximately 1/4 inches in diameter) to keep air pressure inside the panel equal with the outside and make it possible for moisture to escape. The holes should only be made on the bottom of the panel or else rain and dew will get inside the panel. To keep dirt, dust, and bugs away from entering the panel stick a strip of vent tape across the holes.

4 Get perforated hardboard (pegboard) or for that matter any kind of thin, firm and non-conducting component. Cut the pegboard to loosely fit in the panel box.

5 To safeguard the solar cells from the climatic conditions, the panel should have a plexiglass front. Cut the plexiglass to same dimensions as the sheet of plywood (45 inches long and 24.25 inches wide). The plexiglass will rest on top of the ¾ inch X ¾ inch wooden strips (installed in 2nd step). For the time being, keep the plexiglass aside for later use. We will fit it after the solar cells have been placed in the panel box.

6 Paint the panel box and pegboard with latex paint to protect them from moisture and weather. Make sure to paint both the box and pegboard on both sides to avert curling when in contact with moisture. Let the paint dry for a day.

By following these 6 steps you will be able to complete the process of building the solar panel box. Now that we’ve got the panel ready we are going to move on to the next process which is installing solar cells into the panel.

Assembling the solar cells

1 Get started by sketching an outline of each and every solar cell on the pegboard using a pencil, so that you would be aware of where anyone of the 36 photovoltaic cells on it would be positioned.

2 It may be possible that the solar cells you purchased have not been pre-soldered so we need to connect them together to conduct the current between each cell. Start off with only a couple of cells placed upside down on the pegboard. While you place the cells on pegboard ensure the spacing in between the cells is in sync the sketching made on the pegboard in the previous step. Lay the solder tabs of one cell across the solder points on the back of the other cell.

3 Solar cells are delicate while soldering them together have a very gentle touch and low wattage. If you exert too hard, you may crack cells. Utilize flux pen along with the tabbing wire so that the wire adheres to the cells. The flux pen is utilized to help avoid beading of the solder.

4 Following careful removal of cells from the pegboard after soldering them, the next step is to glue them on the pegboard. For that, we will put some silicone caulk on the center of each outline we drew on the pegboard in step 1. Avoid using a lot of silicone caulk, just sufficient enough to hold a solar cell in its place. This would make room for pegboards expansion and warp in different weather conditions.

5 Directly after applying silicone caulk put the cells face-up on the pegboard and wait for the caulk to dry properly.

6 After the cells are affixed in place you can take the pegboard into the sunlight and test it using a voltmeter. If it is working as desired and producing current, position the pegboard in the panel box utilizing 3 wood screws across the top, middle and bottom.

7 Connect the electrical wire to the solar tabbing at the end of the circuit and add a blocking diode in series with it to prevent reverse flow of current to the panel.

8 At the base of the panel drill a hole for the wires to exit.

9 Towards the end of the panel, wire attaches a female plug.

10 Again take the panel out into the sunlight and test its output with a voltmeter. If everything works fine you can screw the plexiglass and close off any gaps with silicone caulk.

11 Around the outer edges of the panel, box applies silicone caulk or aluminum duct tape to seal it.

Awesome! You’ve just built your first solar power panel for a tiny fraction of what a readymade solar panel with identical energy output will cost.